[1] S. Pimputkar, J. S. Speck, S. P. DenBaars, and S. Nakamura, "Prospects for LED lighting," Nature photonics, vol. 3, p. 180, 2009.
[2] H.-C. Kim, M. C. Choi, S. Kim, and D.-K. Jeong, "An AC–DC LED driver with a two-parallel inverted buck topology for reducing the light flicker in lighting applications to low-risk levels," IEEE Transactions on Power Electronics, vol. 32, pp. 3879-3891, 2017.
[3] X. Qu, Q. Liu, H. Wang, and F. Blaabjerg, "System-Level Lifetime Prediction for LED Lighting Applications Considering Thermal Coupling Between LED Sources and Drivers," IEEE Journal of Emerging and Selected Topics in Power Electronics, vol. 6, pp. 1860-1870, 2018.
[4] C. R. Rodrigues, P. S. Almeida, G. M. Soares, J. M. Jorge, D. P. Pinto, and H. A. Braga, "An experimental comparison between different technologies arising for public lighting: LED luminaires replacing high pressure sodium lamps," presented at the 2011 IEEE International Symposium on Industrial Electronics, 2011.
[5] J. D. Bergesen, L. Tähkämö, T. Gibon, and S. Suh, "Potential long‐term global environmental implications of efficient light‐source technologies," Journal of Industrial Ecology, vol. 20, pp. 263-275, 2016.
[6] H. Zhang, "A Viable Nontesting Method to Predict the Lifetime of LED Drivers," IEEE Journal of Emerging and Selected Topics in Power Electronics, vol. 6, pp. 1246-1251, 2018.
[7] I. Akasaki, H. Amano, and S. Nakamura, "The Nobel Prize in Physics 2014," The Royal Swedish Academy of Science, 2014.
[9] S. Abdulla, D. M. Said, K. Youssef, S. Hussien, and H. Waheed, "Saving energy and environment in residential sector," in Power Systems Conference (MEPCON), 2017 Nineteenth International Middle East, 2017, pp. 603-606.
[10] Q. Chen, R. Hu, J. Hu, B. Xie, X. Yu, and X. Luo, "Experimental study of measuring LED's temperatures via thermocouple," in 2016 17th International Conference on Electronic Packaging Technology (ICEPT), 2016, pp. 880-883.
[11] Y.-K. Kuo, Y.-H. Shih, J.-Y. Chang, F.-M. Chen, M.-L. Lee, and J.-K. Sheu, "Theoretical investigation of efficient green tunnel-junction light-emitting diodes," IEEE Electron Device Letters, vol. 38, pp. 75-78, 2017.
[12] X. Tao and B. Yang, "Study of junction temperature effect on electrical power of light-emitting diode (LED) devices," in 2015 IEEE 22nd International Symposium on the Physical and Failure Analysis of Integrated Circuits, 2015, pp. 430-433.
[13] X.-X. Wang, L. Jing, Y. Wang, Q. Gao, and Q. Sun, "The Influence of Junction Temperature Variation of LED on the Lifetime Estimation During Accelerated Aging Test," IEEE Access, vol. 7, pp. 4773-4781, 2019.
[14] J. Zhou, X. Long, J. He, F. Ren, and L. Fang, "Uncertainty Quantification for Junction Temperature of Automotive LED With Die-Attach Layer Microstructure," IEEE Transactions on Device and Materials Reliability, vol. 18, pp. 86-96, 2018.
[15] S. Chen, S. Ding, and H. Ye, "Driver circuit for an LED lighting tube, LED lighting tube and method for providing a controlled DC output power," ed: Google Patents, 2019.
[16] S.-W. Lee, H.-J. Choe, and J.-J. Yun, "Performance improvement of a boost LED driver with high voltage gain for edge-lit LED backlights," IEEE Transactions on Circuits and Systems II: Express Briefs, vol. 65, pp. 481-485, 2018.
[17] R. Lenk and C. Lenk, Practical lighting design with LEDs: John Wiley & Sons, 2017.
[19] Z. Guo, K. Liu, L. Zheng, T.-m. Shih, Y. Lu, T. Wu, et al., "Investigation on three-hump phosphor-coated white light-emitting diodes for healthy lighting by genetic algorithm," IEEE Photonics Journal, vol. 11, pp. 1-10, 2019.
[20] H.-T. Chen, S.-C. Tan, and S. R. Hui, "Nonlinear dimming and correlated color temperature control of bicolor white LED systems," IEEE Transactions on Power Electronics, vol. 30, pp. 6934-6947, 2015.
[21] R. Malik, K. K. Ray, and S. Mazumdar, "Wide-Range, Open-Loop, CCT and Illuminance Control of an LED Lamp Using Two-Component Color Blending," IEEE Transactions on Power Electronics, vol. 33, pp. 9803-9818, 2018.
[22] H. Chen, X. Zhou, S. Lin, and J. Liu, "Luminous Flux and CCT Stabilization of White LED Device With a Bilevel Driver," IEEE Photonics Journal, vol. 10, pp. 1-10, 2018.
[23] T. Erdem, S. Nizamoglu, X. W. Sun, and H. V. Demir, "A photometric investigation of ultra-efficient LEDs with high color rendering index and high luminous efficacy employing nanocrystal quantum dot luminophores," Optics Express, vol. 18, pp. 340-347, 2010.
[24] E. S. Lee, B. H. Choi, J. P. Cheon, G. C. Lim, B. C. Kim, and C. T. Rim, "Temperature-Robust LC 3 Passive LED Drivers With Low THD, High Efficiency and PF, and Long Life," IEEE Journal of Emerging and Selected Topics in Power Electronics, vol. 3, pp. 829-840, 2015.
[25] T.-J. Liang, W.-J. Tseng, J.-F. Chen, and J.-P. Wu, "A novel line frequency multistage conduction LED driver with high power factor," IEEE Transactions on Power Electronics, vol. 30, pp. 5103-5115, 2015.
[26] A. F. Zobaa and M. M. A. Aziz, "The most economical power factor correction according to tariff structures in Egypt," IEEE transactions on power delivery, vol. 20, pp. 912-918, 2005.
تقییم معملی للأداء الضوئی وجودة القدرة للمبات الصمامات الثنائیة الباعثة للضوء فی ظروف تشغیل مختلفة
نظرًا للاهتمام العالمی بتکنولوجیا الإضاءة الباعثة للضوء (LED) ، یبذل مصنعو لمبات LED والباحثون الأکادیمیون جهودًا کبیرة لدراسة کل جانب من جوانب أداء هذا النوع من اللمبات.
تبحث هذه الرسالة فی الخصائص الضوئیة والکهربائیة للمبات LED. وقد تمت دراسة تأثیر درجة الحرارة على الضوء المنبعث منها، وتم محاکاة نموذج لمبات LED فی هذه الرسالة. کما قدمت أیضا الرسالة نتائج تجریبیة لتأثیر اختبار التقادم (مرور الزمن) على المتغیرات الضوئیة للمبات LED مثل التدفق الضوئی ودرجة حرارة اللون (CCT) ومؤشر تقدیم اللون (CRI).
تمکن هذه الدراسة من فهم ومراقبة الضوء المرئی المنبعث من لمبات LED وتعد مهمة فی العدید من التطبیقات حیث أن معامل درجة حرارة اللون CCT)) معامل هام فی مجالات الإضاءة والفیدیو والتصویر الفوتوغرافی والصناعة کما أنه من المرغوب فیه أیضا تحقیق قیمة عالیة فی مؤشر تقدیم الألوان ((CRI وذلک فی التطبیقات الحساسة للون مثل العنایة بالأطفال حدیثی الولادة فی المستشفیات.
وقد أثبتت النتائج التجریبیة أیضًا أن معامل القدرة لللمبة LED ینخفض إلى نسبة تصل إلى 26% تقریبًا عن قیمته المقننة عند تشغیله فی درجات حرارة عالیة.